This Genesis three-way corner piece fits the matching rounded tile profile and finishes the corner without miter cuts. This version is intended for a tile thickness of 10 mm. The version is black.
Product & function
Cutting a miter corner takes time and results in a sharp joint. This corner piece does that work for you: it fits the profile and provides a rounded, safe corner. The profile is made of UPVC with good chemical resistance.
Application & compatibility
This corner piece belongs to the quarter-round plastic tile profiles from the ETR series. Take the corner piece in the same thickness and finish as the profile. Therefore, choose the profile first and then the matching corner piece.
Use & points of attention
- First place the profile and keep the corner free.
- Set the corner piece in the tile adhesive, flush with the profile ends.
- Check that the corner piece is level with the profile before the adhesive sets.
Not suitable for use above 60 °C. Resistant to most oils, alcohols, gasoline, and fats. Not resistant to aromatic and chlorinated hydrocarbons, ketones, nitro compounds, esters, and cyclic ethers: these cause swelling. Periodically clean the profile with a neutral cleaning agent. This keeps the appearance in check and extends the lifespan.
Main features
- Finishes corners without miter cuts
- Rounded, safe corner without a sharp edge
- UPVC with good chemical resistance
- Color fastness within ΔE ≤ 4
Technical specifications
| Package contents |
4 pieces |
| Application |
Corner finish for a round PVC tile profile |
| Vicat softening point |
79.8 ± 20 °C (ISO 306) |
| Shore hardness |
70 ± 5 ShD (PN-EN ISO 868:2005) |
| Charpy impact strength |
1.7 kJ/m² (PN-EN ISO 179-1/1eC:2010, tested on raw material) |
| Maximum stress |
35.4 MPa (PN-EN ISO 527-1/-2:2012) |
| Color variation |
ΔE ≤ 4 |
| Maximum operating temperature |
60 °C |
Frequently asked questions
What size corner piece do I need? The same thickness as the profile you are fitting it to. A 10 mm corner piece belongs to a 10 mm profile.
How many corner pieces do I need? One per corner. Count the inside and outside corners of your tile surface and keep a spare on hand.
Must the finish match exactly? Yes. Take the corner piece and profile in the same finish, otherwise the color difference at the corner will be visible.
Does plastic discolor over time? The manufacturer tests the color against a fixed reference with a maximum deviation of ΔE 4. Periodic cleaning with a neutral agent keeps the appearance in check.
