The Litokol LitoLevel leveling set is part of the LitoLevel leveling system, which eliminates height differences between tiles without the need for pliers or other tools. It comes as a bucket with 150 bases, 150 cones, and 150 nuts.
Product & Function
LitoLevel consists of three parts: a base under the tile, a cone on top of it, and a nut that you tighten. By tightening the nut, vertical pressure is created on the free cone. That's the whole idea: the pressure goes straight down, preventing tiles from rotating or shifting, and keeping the joint width consistent. The cone does not rub against the tile surface, so no streaks or stains are left behind. You can gradually build up and release the pressure by tightening or loosening the nut.
Application & Compatibility
- Leveling when laying large-format porcelain stoneware and ceramics
- Natural stone and thin slabs of stoneware or composite stone
- Tile thickness from 3 to 12 mm
- Joint width 1.5 mm, or wider in combination with spacers or T-pieces
Please note: the base is designed for a 1.5 mm joint. If you want a wider joint, use spacers or T-pieces in the desired size, always greater than 1.5 mm.
Usage & Considerations
- Slide the base under each side of the tile after gluing
- For large tiles and thin slabs, also glue the back
- Tap with a white rubber mallet, or thin slabs with a tile vibrator
- Place the next row and align it with the white rubber mallet
- Place the cone on the base and tighten the nut until the tiles are level
- Allow the adhesive to dry completely
- First loosen the nuts and remove them with the caps, then break the bases
- Break off the base in the same direction as the joint line
If you are working with a product whose processing times you do not know, adhere to the technical data sheet of that product.
Key Features
- Complete set: bases, cones, and nuts
- Cone and nut reusable hundreds of times
- No pliers or tools needed
- Vertical pressure: no rotation or shifting of tiles
- The cone does not rub against the tile surface
Technical Specifications
| Property |
Value |
| Type |
Part of the LitoLevel leveling system |
| Contents |
150 bases, 150 cones, and 150 nuts |
| Tile thickness |
3 to 12 mm |
| Joint width |
1.5 mm |
| Tools needed |
No |
Frequently Asked Questions
What is included in this set? A bucket with 150 bases, 150 cones, and 150 nuts: all three components of the system, in equal numbers.
What tile thickness can I level? From 3 to 12 mm. That's what the bases are designed for.
Can I make a wider joint than 1.5 mm? Yes, by combining LitoLevel with spacers or T-pieces in the desired size. This must then be greater than 1.5 mm.
Which parts can I reuse? The cone and the nut; both are made of hard plastic and last hundreds of times. The base breaks off and is single-use.
