Litokol Starlike Pro is a sixth-generation decorative epoxy grout, here in Argilla Bianca (13) color. It is a two-component product: the colored gel and the polymeric hardener are together in one 2.5 kg bucket. You can grout tiles, mosaics, and natural stone with it, and the same product can also be used as tile adhesive.
Color & Atmosphere
Argilla Bianca (13) is a warm white with a yellowish clay undertone. It makes white tile work softer and less blue.
Product & Application
Starlike Pro is designed for joints from 1 to 20 mm, on floors and walls, indoors and outdoors. The cured grout is waterproof, stain-resistant, and UV-resistant. The color comes from colored quartz and glass microspheres instead of chemical pigments, ensuring color stability.
- Ceramic and glass mosaic, ceramic tiles and porcelain stoneware
- Large format tiles and laminated stoneware slabs
- Marble, granite, natural stone and reconstituted stone
- Terracotta and clinker
- Wet rooms, bathrooms and showers, swimming pools and fountains, spas and hammams
- Terraces, balconies, facades and industrial floors
For natural stone, polished porcelain stoneware, mosaic, and porous surfaces, the manufacturer recommends always making a test joint first. This helps determine if the material discolors or is difficult to clean.
Substrate & Compatibility
As a grout, Starlike Pro should be applied to joints that are dry, dust-free, and open for at least two-thirds of the tile thickness. If used as an adhesive, the substrate must be load-bearing and free of loose particles, grease, oil, paint, wax, and rising damp, according to UNI 11493-1.
- Screeds, leveling layers and plasterwork
- Gypsum and anhydrite
- Concrete, aerated concrete and fiber cement boards
- Existing tiles, metal and wood
- Underfloor heating, waterproofing systems and decoupling membranes
For the elastic sealing of expansion, control, and connection joints, do not use epoxy grout, but a sealant from the Pixel 3D line.
Processing
Cut the hardener bag and empty it completely into the bucket containing part A. Mix with a slow-speed mixer at approximately 300 rpm until a creamy, lump-free mass is formed, scraping the sides and bottom of the bucket afterwards. Manual mixing is not recommended as an uneven mixture affects the final strength.
- Process between +10 °C and +30 °C
- Over 90 minutes of working time in the bucket
- Apply with the Starlike rubber trowel, diagonally to the direction of the joint
- Clean while the product is fresh, with white felt and then a damp sponge
- Light foot traffic after 24 hours, fully usable after 5 days, swimming pools after 7 days
Remove residues from the tile surface within 24 hours and no later than 48 hours, using Starlike Care for floors or Starlike Wall Care for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, and protect the work from direct sunlight and strong drafts for the first 12 hours.
Key Features
- Grout and glue with the same product: joints from 1 to 20 mm, adhesive layers from 1 to 10 mm
- Waterproof and shrink-free, even under permanent water exposure
- Resistant to temperatures from -20 °C to +100 °C
- Color stable due to colored quartz and glass microspheres instead of pigments
- Part A and part B pre-dosed in one bucket, so no weighing required
- Can be mixed with Starlike Finishes for a glitter or metallic effect, indoors only
Technical Specifications
| Feature |
Value |
| Brand |
Litokol |
| Product Name |
Starlike Pro |
| Product Type |
Decorative epoxy grout, sixth generation |
| Binder |
Epoxy-based reaction resin, two components |
| Color |
Argilla Bianca |
| Color Number |
13 |
| Color Series |
The Colours of the Earth |
| Packaging |
2.5 kg, part A and B in one bucket |
| Grout Classification |
RG (EN 13888) |
| Adhesive Classification |
R2 T (EN 12004) |
| Joint Width |
1 to 20 mm |
| Adhesive Layer Thickness |
1 to 10 mm |
| Mixing Ratio |
Part A 93.7 — part B 6.3 by weight |
| Specific Gravity of Mixture |
1.55 kg/dm³ |
| Working Time |
More than 90 minutes |
| Processing Temperature |
+10 °C to +30 °C |
| Light Foot Traffic |
After 24 hours |
| Fully Usable |
After 5 days, swimming pools after 7 days |
| Operating Temperature |
−20 °C to +100 °C |
| Compressive Strength after 28 days |
≥ 45.0 N/mm² (EN 12808-3) |
| Flexural Strength after 28 days |
≥ 30 N/mm² (EN 12808-3) |
| Abrasion Resistance |
≤ 250 mm³ (EN 12808-2) |
| Shrinkage |
≤ 1.5 mm/m (EN 12808-4) |
| Water Absorption after 240 minutes |
≤ 0.1 g (EN 12808-5) |
| Fire Behavior |
Class E (DoP CPR-IT332) |
| Shelf Life |
36 months, store dry and frost-free |
Frequently Asked Questions
How much Starlike Pro do I need? Consumption depends on tile size, tile thickness, and joint width. Use the calculation tool on the product page or Litokol's consumption calculator. For adhesive, calculate 1.1 kg/m² with a 2 mm notch, increasing to 3.5 kg/m² with 10 mm.
Can I use this grout over underfloor heating? Yes. Underfloor heating is listed in the technical data sheet among the permissible substrates, and the cured grout is resistant from -20 °C to +100 °C. However, observe the normal waiting times: 24 hours for light foot traffic and 5 days for full use.
Why do I need to perform a test with natural stone first? Natural stone, mosaic, and polished stoneware vary greatly by origin and production. Litokol therefore recommends a test joint to determine in advance whether the surface discolors or is difficult to clean.
What if the temperature is below 10 degrees? Do not process the product if the temperature drops below +10 °C within 24 hours. If working around this limit, Litokol advises adding EpoxyGel booster: one 50-gram sachet per 2.5 kg, two sachets per 5 kg.
