Litokol Starlike Pro is a sixth-generation decorative epoxy grout, here in the color Bianco di Spagna (26). It is a two-component product: the colored gel and the polymeric hardener are together in one 2.5 kg bucket. You can use it to grout tiles, mosaics, and natural stone, and the same product can also be used as tile adhesive.
Color & Atmosphere
Bianco di Spagna (26) is a warm, creamy white that is just not a cold white. In a bathroom with cream-colored or travertine-look tiles, the grout lines almost disappear, making the surface look calm.
Product & Application
Starlike Pro is intended for joints from 1 to 20 mm, on floors and walls, indoors and outdoors. The cured grout is waterproof, stain-resistant, and UV-resistant. The color comes from colored quartz and glass microspheres instead of chemical pigments, which keeps the color stable.
- Mosaic of ceramic and glass, ceramic tiles, and porcelain stoneware
- Large format tiles and laminated stoneware slabs
- Marble, granite, natural stone, and reconstituted stone
- Terracotta and clinker
- Wet rooms, bathrooms and showers, swimming pools and fountains, spa and hammam
- Terraces, balconies, facades, and industrial floors
For natural stone, polished porcelain stoneware, mosaic, and porous surfaces, the manufacturer recommends always making a test joint first. This determines whether the material discolors or is difficult to clean.
Substrate & Compatibility
As grout, Starlike Pro is applied in joints that are dry and dust-free and open for at least two-thirds of the tile thickness. If used as adhesive, the substrate must be load-bearing and free of loose particles, grease, oil, paint, wax, and rising damp, according to UNI 11493-1.
- Screeds, leveling compounds, and plasterwork
- Gypsum and anhydrite
- Concrete, aerated concrete, and fiber cement boards
- Existing tiles, metal, and wood
- Underfloor heating, waterproofing systems, and separation membranes
For the elastic sealing of expansion, control, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.
Processing
Cut open the bag with hardener and empty it completely into the bucket containing part A. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is formed, scraping the sides and bottom of the bucket afterwards. Manual mixing is not recommended, as an uneven mixture affects the final strength.
- Process between +10 °C and +30 °C
- Over 90 minutes of working time in the bucket
- Apply with the Starlike rubber trowel, diagonally to the joint direction
- Clean while the product is fresh, with white felt and then a damp sponge
- Lightly walkable after 24 hours, fully usable after 5 days, swimming pools after 7 days
Remove residues from the tile surface within 24 hours and no later than 48 hours, using Starlike Care for floors or Starlike Wall Care for walls. After that, the product can only be removed mechanically. Do not apply anything when the temperature drops below +10 °C within 24 hours, and protect the work from direct sunlight and strong drafts for the first 12 hours.
Key Features
- Grout and glue with the same product: joints from 1 to 20 mm, adhesive layers from 1 to 10 mm
- Waterproof and shrink-free, even under permanent water exposure
- Resistant to temperatures from -20 °C to +100 °C
- Color stable due to colored quartz and glass microspheres instead of pigments
- Part A and part B pre-dosed in one bucket, so no weighing required
- Can be mixed with Starlike Finishes for a glitter or metallic effect, indoors only
Technical Specifications
| Characteristic |
Value |
| Brand |
Litokol |
| Product Name |
Starlike Pro |
| Product Type |
Decorative epoxy grout, sixth generation |
| Binder |
Epoxy-based reaction resin, two components |
| Color |
Bianco di Spagna |
| Color Number |
26 |
| Color Range |
The Colours of the Earth |
| Packaging |
2.5 kg, part A and B in one bucket |
| Grout Classification |
RG (EN 13888) |
| Adhesive Classification |
R2 T (EN 12004) |
| Joint Width |
1 to 20 mm |
| Layer Thickness as Adhesive |
1 to 10 mm |
| Mixing Ratio |
Part A 93.7 — part B 6.3 by weight |
| Specific Gravity of Mixture |
1.55 kg/dm³ |
| Working Time |
More than 90 minutes |
| Processing Temperature |
+10 °C to +30 °C |
| Lightly Walkable |
After 24 hours |
| Fully Usable |
After 5 days, swimming pools after 7 days |
| Operating Temperature |
−20 °C to +100 °C |
| Compressive Strength after 28 days |
≥ 45.0 N/mm² (EN 12808-3) |
| Flexural Strength after 28 days |
≥ 30 N/mm² (EN 12808-3) |
| Abrasion Resistance |
≤ 250 mm³ (EN 12808-2) |
| Shrinkage |
≤ 1.5 mm/m (EN 12808-4) |
| Water Absorption after 240 minutes |
≤ 0.1 g (EN 12808-5) |
| Fire Behavior |
Class E (DoP CPR-IT332) |
| Shelf Life |
36 months, store dry and frost-free |
Frequently Asked Questions
How much Starlike Pro do I need? Consumption depends on the tile size, tile thickness, and joint width. Use the calculation tool on the product page or Litokol's consumption calculator. For adhesive, calculate with 1.1 kg/m² for a 2 mm notch, increasing to 3.5 kg/m² for 10 mm.
Can I use this grout over underfloor heating? Yes. Underfloor heating is listed in the technical data sheet among the permissible substrates, and the cured grout is resistant from -20 °C to +100 °C. Do observe the normal waiting times: 24 hours for light foot traffic and 5 days for full use.
Why do I need to do a test first for natural stone? Natural stone, mosaic, and polished stoneware vary greatly by origin and production. Litokol therefore prescribes a test joint to determine in advance whether the surface discolors or is difficult to clean.
What if the temperature is colder than 10 degrees? Do not process the product if the temperature drops below +10 °C within 24 hours. If working around that limit, Litokol advises adding EpoxyGel booster: one 50 gram sachet per 2.5 kg, two sachets per 5 kg.
