Litokol Starlike Pro is a sixth-generation decorative epoxy grout, here in the color Terra di Borgogna (29). It is a two-component product: the colored gel and the polymeric hardener are together in one 2.5 kg bucket. You can use it to grout tiles, mosaics, and natural stone, and the same product can also be used as tile adhesive.
Color & Atmosphere
Terra di Borgogna (29) is a warm, light reddish-brown earth tone. It connects beige tiling with a wood look or cotto in the same room.
Product & Application
Starlike Pro is intended for joints from 1 to 20 mm, on floors and walls, indoors and outdoors. The hardened joint is waterproof, stain-resistant, and UV-resistant. The color comes from colored quartz and glass microspheres instead of chemical pigments, which keeps the color stable.
- Ceramic and glass mosaics, ceramic tiles, and porcelain stoneware
- Large format tiles and laminated stoneware slabs
- Marble, granite, natural stone, and reconstituted stone
- Terracotta and clinker
- Wet rooms, bathrooms and showers, swimming pools and fountains, spas and hammams
- Terraces, balconies, facades, and industrial floors
For natural stone, polished porcelain stoneware, mosaics, and porous surfaces, the manufacturer prescribes always making a test joint first. This way, you can determine whether the material discolors or is difficult to clean.
Substrate & Compatibility
As grout, apply Starlike Pro to joints that are dry, dust-free, and open for at least two-thirds of the tile thickness. If you use it as adhesive, the substrate must be load-bearing and free of loose parts, grease, oil, paint, wax, and rising damp, according to UNI 11493-1.
- Screeds, leveling compounds, and plasterwork
- Gypsum and anhydrite
- Concrete, cellular concrete, and fiber cement boards
- Existing tiles, metal, and wood
- Underfloor heating, waterproofing systems, and decoupling membranes
For the elastic sealing of expansion, control, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.
Processing
Cut open the hardener bag and empty it completely into the bucket containing part A. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass, scraping the wall and bottom of the bucket. Manual mixing is not recommended, as an uneven mixture affects the final strength.
- Process between +10 °C and +30 °C
- Over 90 minutes of processing time in the bucket
- Apply with the Starlike rubber trowel, diagonally to the joint direction
- Clean while the product is fresh, with white felt and then a damp sponge
- Lightly walkable after 24 hours, fully in use after 5 days, swimming pools after 7 days
Remove residues from the tile surface within 24 hours and no later than 48 hours, using Starlike Care for floors or Starlike Wall Care for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, and protect the work from direct sunlight and strong drafts for the first 12 hours.
Key Features
- Grout and glue with the same product: joints from 1 to 20 mm, adhesive layers from 1 to 10 mm
- Waterproof and shrink-free, even under permanent water load
- Resistant to temperatures from -20 °C to +100 °C
- Color-stable due to colored quartz and glass microspheres instead of pigments
- Part A and part B pre-dosed in one bucket, so no weighing
- Can be mixed with Starlike Finishes for a glitter or metallic effect, indoors only
Technical Specifications
| Feature |
Value |
| Brand |
Litokol |
| Product Name |
Starlike Pro |
| Product Type |
Decorative epoxy grout, sixth generation |
| Binder |
Epoxy-based reaction resin, two components |
| Color |
Terra di Borgogna |
| Color Number |
29 |
| Color Series |
The Colours of the Earth |
| Packaging |
2.5 kg, part A and B in one bucket |
| Grout Classification |
RG (EN 13888) |
| Adhesive Classification |
R2 T (EN 12004) |
| Joint Width |
1 to 20 mm |
| Layer Thickness as Adhesive |
1 to 10 mm |
| Mixing Ratio |
Part A 93.7 — part B 6.3 by weight |
| Specific Gravity of Mixture |
1.55 kg/dm³ |
| Processing Time |
More than 90 minutes |
| Processing Temperature |
+10 °C to +30 °C |
| Lightly Walkable |
After 24 hours |
| Fully in Use |
After 5 days, swimming pools after 7 days |
| Operating Temperature |
−20 °C to +100 °C |
| Compressive Strength after 28 days |
≥ 45.0 N/mm² (EN 12808-3) |
| Flexural Strength after 28 days |
≥ 30 N/mm² (EN 12808-3) |
| Abrasion Resistance |
≤ 250 mm³ (EN 12808-2) |
| Shrinkage |
≤ 1.5 mm/m (EN 12808-4) |
| Water Absorption after 240 minutes |
≤ 0.1 g (EN 12808-5) |
| Fire Behavior |
Class E (DoP CPR-IT332) |
| Shelf Life |
36 months, store dry and frost-free |
Frequently Asked Questions
How much Starlike Pro do I need? Consumption depends on the tile format, tile thickness, and joint width. Use the calculation tool on the product page or Litokol's consumption calculator. As adhesive, count on 1.1 kg/m² with a 2 mm notch, increasing to 3.5 kg/m² with 10 mm.
Can I use this grout over underfloor heating? Yes. Underfloor heating is listed in the technical data sheet as an allowed substrate, and the hardened grout is resistant from -20 °C to +100 °C. However, observe the normal waiting times: 24 hours for light foot traffic and 5 days for full use.
Why do I need to do a test first for natural stone? Natural stone, mosaics, and polished stoneware vary greatly in origin and production. Litokol therefore prescribes a test joint, so you can see in advance whether the surface discolors or is difficult to clean.
What if it's colder than 10 degrees? Do not process the product if the temperature drops below +10 °C within 24 hours. If working around that limit, Litokol advises adding EpoxyGel booster: one 50 gram sachet per 2.5 kg, two sachets per 5 kg.
