Litokol Starlike EVO is a two-component epoxy grout, here in Grigio Oslo (800) color. The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware, and mosaics, and the same product can also be used as tile adhesive.
Color & Atmosphere
Grigio Oslo (800) is a translucent gray with shimmer. On glass mosaic, it creates a cool, slightly reflective wall.
Product & Application
This translucent version belongs to the Starlike EVO line and shares its processing and properties. It is intended for decorative tiling where the tile itself must remain visible, on floors and walls, indoors and outdoors.
- Ceramic tiles, porcelain stoneware, and single or double-fired tiles
- Ceramic and glass mosaic
- Large format tiles and thin laminated stoneware slabs
- Marble, granite, natural stone, and reconstituted stone
- Terracotta and clinker
- Wet rooms, showers, swimming pools, fountains, spas, and hammams
- Terraces, balconies, facades, and heavily trafficked floors
For natural stone, polished porcelain stoneware, and porous materials, the manufacturer recommends always making a test joint first. This determines whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not suitable for this application.
Substrate & Compatibility
As a grout, apply Starlike EVO to joints that are clean, dust-free, and open across the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free of rising damp.
- Screeds and leveling compounds
- Concrete and plasterwork
- Underfloor heating
- Waterproofing layers, including Coverflex and Aquamaster EVO
- Metal substrates, for example in prefabricated bathrooms
- Wooden kitchen countertops with tiles or mosaic
Butt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner, and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.
Processing
Cut open the hardener bag and empty it completely into the bucket with part A; roll up the bag to ensure nothing is left behind. Mix with a slow-rotating mixer at approximately 300 rpm until a creamy, lump-free mass is formed, then scrape the sides and bottom of the bucket. Manual mixing is not recommended.
- Process between +10 °C and +30 °C, ideally between +18 °C and +23 °C
- Approximately 60 minutes of pot life in the bucket at +23 °C
- Apply with a rubber float, diagonally to the direction of the joint
- Clean while the product is fresh: first with white felt, then with a damp sponge
- Walkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days
Remove haze and residue from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh grout — wait 48 to 72 hours before covering it with breathable material.
Key Features
- Grout and glue with the same product
- Non-absorbent and stain-resistant
- Resistant to temperatures from −20 °C to +100 °C
- Contains no cement, preventing efflorescence
- Color stable: the quartz spheres are colored on the surface
- The hardener is classified only as irritating, not corrosive
Technical Specifications
| Property |
Value |
| Type |
Two-component epoxy grout and adhesive |
| Class |
RG according to EN 13888, R2T according to EN 12004 |
| Mixing ratio |
93.7 parts A to 6.3 parts B, pre-dosed |
| Specific gravity of mixture |
1.55 kg/dm³ |
| Pot life |
Approximately 60 minutes at +23 °C |
| Application temperature |
+10 °C to +30 °C |
| Walkable |
After 24 hours |
| Loadable |
After 5 days, swimming pools after 7 days |
| Operating temperature |
−20 °C to +100 °C |
| Shelf life |
24 months in unopened packaging, store frost-free |
Frequently Asked Questions
Can I also use Starlike EVO as a tile adhesive? Yes. Spread it out with the smooth side of the trowel to about 1 mm and then comb it with the notched side. Grouting can be done after about 24 hours.
How much time do I have after mixing? Approximately 60 minutes at +23 °C. In warm weather, this will be faster, so spread the product quickly over the floor instead of leaving it in the bucket.
What if I remove residues too late? After curing, epoxy can only be removed mechanically. Therefore, remove haze within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.
May I clean the grouted floor with bleach? No. The manufacturer advises against bleach: if not sufficiently diluted or rinsed, the grout may yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.
