Litokol Starlike EVO is a two-component epoxy grout, here in the color Verde Capri (810). The colored paste and the hardener are together in one bucket. You can use it to grout ceramics, porcelain stoneware and mosaics, and the same product can also be used as a tile adhesive.
Color & ambiance
Verde Capri (810) is translucent green with a shimmering core. It works best where light falls on the wall and the color can come alive.
Product & application
This translucent version belongs to the Starlike EVO line and shares its processing and properties. It is intended for decorative tiling where the tile itself must remain visible, on floors and walls, indoors and outdoors.
- Ceramic tiles, porcelain stoneware, and single or double-fired tiles
- Ceramic and glass mosaic
- Large format tiles and thin laminated stoneware slabs
- Marble, granite, natural stone and reconstituted stone
- Terracotta and clinker
- Wet rooms, showers, swimming pools, fountains, spas and hammams
- Terraces, balconies, facades and floors with heavy traffic
For natural stone, polished porcelain stoneware and porous materials, the manufacturer recommends always making a test joint first. This way you can determine whether the material absorbs the resin or is difficult to clean. Tuscan terracotta and other porous items such as concrete kerbstones are not included in the application.
Substrate & compatibility
As a grout, apply Starlike EVO in joints that are clean, dust-free, and open to the full tile thickness. First, check that the tile adhesive is completely dry and cured. If you use it as an adhesive, the substrate must be clean, load-bearing, crack-free, and free from rising damp.
- Screeds and leveling layers
- Concrete and plasterwork
- Underfloor heating
- Waterproofing layers, including Coverflex and Aquamaster EVO
- Metal substrates, for example in prefabricated bathrooms
- Wooden kitchen countertops with tiles or mosaic
Butt joints without space are not allowed, and plastic tile spacers must be removed before grouting. For the elastic sealing of expansion, corner and connection joints, do not use epoxy grout but a sealant from the Pixel 3D line.
Processing
Cut open the bag of hardener and empty it completely into the bucket with part A; roll up the bag so that nothing is left behind. Mix with a slow-rotating mixer of approximately 300 rpm until a creamy, lump-free mass and scrape the wall and bottom of the bucket clean. Manual mixing is discouraged.
- Process between +10 °C and +30 °C, most favorable between +18 °C and +23 °C
- Approximately 60 minutes working time in the bucket at +23 °C
- Apply with a rubber float, diagonally to the joint direction
- Clean while the product is fresh: first white felt, then a damp sponge
- Walkable after 24 hours, fully loadable after 5 days, swimming pools after 7 days
Remove hazes and residues from the tile after approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls. After that, the product can only be removed mechanically. Do not apply anything if the temperature drops below +10 °C within 24 hours, protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint — wait 48 to 72 hours before placing breathable material over it.
Key features
- Grout and glue with the same product
- Non-absorbent and stain-resistant
- Resistant to temperatures from −20 °C to +100 °C
- Contains no cement, so no efflorescence occurs
- Color-stable: the quartz spheres are colored on the surface
- The hardener is classified solely as irritating, not as corrosive
Technical specifications
| Property |
Value |
| Type |
Two-component epoxy grout and adhesive |
| Class |
RG according to EN 13888, R2T according to EN 12004 |
| Mixing ratio |
93.7 parts A to 6.3 parts B, pre-dosed |
| Specific gravity mixture |
1.55 kg/dm³ |
| Working time |
Approx. 60 minutes at +23 °C |
| Processing temperature |
+10 °C to +30 °C |
| Walkable |
After 24 hours |
| Loadable |
After 5 days, swimming pools after 7 days |
| Operating temperature |
−20 °C to +100 °C |
| Shelf life |
24 months in unopened packaging, store frost-free |
Frequently Asked Questions
Can I also use Starlike EVO as tile adhesive? Yes. Spread it with the smooth side of the trowel to about 1 mm and then comb it up with the notched side. Grouting can be done after approximately 24 hours.
How long do I have after mixing? Approximately 60 minutes at +23 °C. In warm weather, this goes faster, so spread the product quickly over the floor instead of leaving it in the bucket.
What if I remove residues too late? After hardening, epoxy can only be removed mechanically. Therefore, remove hazes within approximately 24 hours with Litonet EVO for floors or Litonet Gel EVO for walls.
May I clean the grouted floor with bleach? No. The manufacturer advises against bleach: with insufficient dilution or rinsing, the grout can yellow, which is especially noticeable on light colors. Also, do not use aggressive cleaners for the first five days.
