Litokol StyleGrout Tech is a flexible cement-based grout, here in sand-beige. It comes as a powder in a 3 kg bag and is mixed with water. You use it to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.
Color & Atmosphere
Beige-2 is sand-beige with a grey core. With greige and travertine-look, the grout blends with the tile instead of contrasting with it.
Product & Application
StyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.
- Ceramic tiles, porcelain stoneware, and single or double-fired tiles
- Ceramic and glass mosaic
- Large format tiles and thin laminated stoneware slabs
- Marble, granite, natural stone, and reconstituted stone
- Terracotta and clinker
- Wet rooms, showers, swimming pools, fountains, spas, and hammams
- Terraces, balconies, facades, and industrial floors
- Underfloor heating
With polished porcelain stoneware and natural stone, there are often micropores in the surface, which can cause the tile to discolour or be difficult to clean. The manufacturer recommends always making a test joint in such cases.
Substrate & Compatibility
First, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open across the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers should be removed before grouting; butt joints without space are not permitted.
- For highly absorbent tiles or in hot weather: moisten the joints first with a wet sponge
- Do not apply to damp substrates or in cases of rising damp
- Do not add lime, cement, or other materials to the product
- For expansion, corner, and connection joints, use an elastic sealant, not grout
For interior work, count on expansion joints every 20 to 25 m², and outdoors every 9 to 15 m². Outdoors, these joints must also be waterproofed.
Processing
First, put the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is obtained. Let the mixture rest for approximately 3 minutes and then mix again for a few more seconds. Manual mixing is not recommended.
- Approximately 0.8 liters of water per 3 kg bag, which is 26 to 28%
- Process between +5 °C and +35 °C
- Approximately 50 minutes working time at +23 °C
- Apply with a rubber float, diagonally to the direction of the joint
- After 15 to 30 minutes, as soon as the product becomes matt, wash off with a well-wrung sponge
Adhere to the water-mixing ratio: more water results in shrinkage and lower final strength, and different amounts of water between two batches will cause color variations in the final result. Do not wash off too early — if the product is still plastic, you will partly empty the joint and the color will be uneven. Adding water after the binding has begun is not permitted.
Remove veils after curing with a clean cloth. If residues remain on the tile, they can be removed six to seven days after grouting with Litoclean or Litoclean EVO. Do not use these cleaners on non-acid-resistant materials such as marble or limestone. Protect the work for the first 12 hours from direct sunlight and strong drafts, and do not cover the fresh joint: wait 24 to 48 hours before placing breathable material over it.
Key Features
- Joint width from 0 to 20 mm, in one product for floor and wall
- Class CG2WA: reduced water absorption and high abrasion resistance
- Compensated shrinkage, keeping the joint full and compact
- Prevents the formation of efflorescence
- Stable, even color
- Resistant to temperatures from -30 °C to +80 °C
- Remains easy to work with and does not thicken unpleasantly
Technical Specifications
| Property |
Value |
| Type |
Cement-based grout in powder form |
| Class |
CG2WA according to EN 13888 and ISO 13007-3 |
| Content |
3 kg bag |
| Joint Width |
0 to 20 mm |
| Mixing Water |
26 to 28%, approx. 0.8 liters per 3 kg |
| Ripening time of the mixture |
3 minutes |
| Working time |
Approx. 50 minutes at +23 °C |
| Processing temperature |
+5 °C to +35 °C |
| Waiting time for cleaning |
Approx. 20 minutes |
| Loadable |
After 24 hours, swimming pools after 7 days |
| Operating temperature |
−30 °C to +80 °C |
| Specific gravity of mixture |
1.94 kg/dm³ |
| pH of the mixture |
13 |
| Shelf life |
36 months in unopened bag, store dry and frost-free |
Frequently Asked Questions
How much water goes into a 3 kg bag? Approximately 0.8 liters, which is 26 to 28%. Stick to this: more water causes shrinkage and lower final strength, and between two batches with different water-mixing ratios, you will see color variation in the joint.
Why do I have to wait 15 to 30 minutes before washing off? As long as the product is still plastic, the sponge will partly empty the joint and the color will become uneven. Wait until the surface becomes matt, then wash off with a well-wrung sponge.
Can I use this grout on natural stone? Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stone types can discolour. The cleaners Litoclean and Litoclean EVO are acidic and must NOT be used on marble or limestone.
When can the floor be used again? The work is loadable after 24 hours. For swimming pools, seven days apply before the pool can be filled.
