Litokol StyleGrout Tech is a flexible cement-based grout, here in the color warm ivory. It comes as a powder in a 3 kg bag and is mixed with water. It can be used to grout ceramics, porcelain stoneware, mosaics, large slabs, and natural stone, on floors and walls, indoors and outdoors.
Color & Atmosphere
Ivory-3 is the deepest ivory in the range, leaning towards light beige. It works well with warm natural stone and sand-colored stoneware.
Product & Application
StyleGrout Tech falls into class CG2WA according to EN 13888 and ISO 13007-3. This is an improved cement-based grout with reduced water absorption and high abrasion resistance. The joint remains full and smooth, and the product is formulated to prevent efflorescence.
- Ceramic tiles, porcelain stoneware, and single or double-fired tiles
- Ceramic and glass mosaic
- Large-format tiles and thin laminated stoneware slabs
- Marble, granite, natural stone, and reconstituted stone
- Terracotta and clinker
- Wet rooms, showers, swimming pools, fountains, spas, and hammams
- Terraces, balconies, facades, and industrial floors
- Underfloor heating
With polished porcelain stoneware and natural stone, micropores are often present on the surface, which can cause the tile to discolour or be difficult to clean. The manufacturer recommends always creating a test joint in such cases.
Substrate & Compatibility
First, check that the tile adhesive is completely dry and cured. The joints must be clean, dust-free, and open across the full tile thickness, and any adhesive residue that has run into the joint must be removed. Plastic tile spacers should be removed before grouting; butt joints without space are not permitted.
- For highly absorbent tiles or in warm weather: moisten the joints first with a damp sponge
- Do not apply to damp substrates or in cases of rising damp
- Do not add lime, cement, or other materials to the product
- For expansion, corner, and connection joints, use an elastic sealant, not grout
For interior work, allow for expansion joints every 20 to 25 m², and for exterior work, every 9 to 15 m². Outside, these joints must also be finished watertight.
Processing
First, pour the water into a clean bucket and slowly add the powder while mixing with a drill and mixing paddle until a lump-free mass is formed. Let the mixture rest for approximately 3 minutes, then mix again for a few more seconds. Manual mixing is not recommended.
- Approximately 0.8 liters of water per 3 kg bag, which is 26 to 28%
- Process between +5 °C and +35 °C
- Approximately 50 minutes working time at +23 °C
- Apply with a rubber grout float, diagonally to the joint direction
- After 15 to 30 minutes, as soon as the product becomes matte, wash off with a well-wrung sponge
Adhere to the water-to-mix ratio: more water leads to shrinkage and lower final strength, and different amounts of water between two batches will result in color differences in the final product. Do not wash off too early—if the product is still plastic, you will partially empty the joint and the color will be uneven. Adding water after binding has begun is not allowed.
Remove haze with a clean cloth after hardening. If residue remains on the tile, it can be removed six to seven days after grouting with Litoclean or Litoclean EVO. Do not use these cleaners on non-acid-resistant materials such as marble or limestone. Protect the work from direct sunlight and strong drafts for the first 12 hours, and do not cover the fresh joint: wait 24 to 48 hours before covering it with breathable material.
Key Features
- Joint width from 0 to 20 mm, in one product for floor and wall
- Class CG2WA: reduced water absorption and high abrasion resistance
- Compensated shrinkage, keeping the joint full and compact
- Prevents efflorescence
- Stable, uniform color
- Resistant to temperatures from -30 °C to +80 °C
- Remains easy to work with and does not thicken annoyingly
Technical Specifications
| Property |
Value |
| Type |
Cement-based grout in powder form |
| Class |
CG2WA according to EN 13888 and ISO 13007-3 |
| Content |
3 kg bag |
| Joint width |
0 to 20 mm |
| Mixing water |
26 to 28%, approximately 0.8 liters per 3 kg |
| Maturity time of the mixture |
3 minutes |
| Working time |
Approximately 50 minutes at +23 °C |
| Application temperature |
+5 °C to +35 °C |
| Waiting time before cleaning |
Approximately 20 minutes |
| Trafficable |
After 24 hours, swimming pools after 7 days |
| Usage temperature |
−30 °C to +80 °C |
| Specific gravity of mixture |
1.94 kg/dm³ |
| pH of the mixture |
13 |
| Shelf life |
36 months in unopened bag, store dry and frost-free |
Frequently Asked Questions
How much water goes into a 3 kg bag? Approximately 0.8 liters, which is 26 to 28%. Adhere to this: more water causes shrinkage and lower final strength, and between two batches with different water-to-mix ratios, you will see color differences in the grout.
Why do I have to wait 15 to 30 minutes before washing off? As long as the product is still plastic, the sponge will partially empty the joint and the color will be uneven. Wait until the surface becomes matte, then wash off with a well-wrung sponge.
Can I use this grout on natural stone? Yes, marble, granite, and natural stone are listed in the technical data sheet. However, always make a test joint first, as porous stones can discolour. The cleaners Litoclean and Litoclean EVO are acidic and should not be used on marble or limestone.
When can the floor be used again? The work is trafficable after 24 hours. For swimming pools, allow seven days before the pool can be filled.
