This Genesis EAQ series quarter-round tile profile features a classic quarter-round visible face and protects the edge of ceramic tiles or a similar hard surface in wall and floor applications. This version is designed for 12 mm tiles, has a length of 2.7 metres and is supplied in white.
Product & function
The profile is extruded from AA 6063 T6 aluminium and this version is powder-coated. For outdoor applications, Genesis recommends a powder-coated finish such as this.
Application & compatibility
The profile is designed for wall and floor tiles. Choose the version that matches the thickness of your tile, so that the top of the profile is flush with the tile surface. The matching white 12 mm outside corner piece is EAC120.01. This allows you to finish the corner without cutting a miter. Genesis also produces EAC outside corners and EIQ inside corners in 8, 10 and 12 mm for this series.
Use & key points
- Choose the profile that matches the thickness of the tile.
- Apply tile adhesive over the area forming the edge of the tilework.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange to ensure it is fully embedded.
- Bed the tiles firmly. The tile surface should be flush with the top of the profile: the profile should not sit higher than the tile, but approximately 1 mm lower.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues immediately from visible surfaces and ensure that the profile is fully embedded, without cavities in which alkaline water can collect. The surface is sensitive to scratches and wear and can be damaged by tile adhesive, mortar or grout. Before using in chemical or mechanical applications, check whether aluminium is suitable for the situation. No special maintenance is required. An oxide film can be removed with a standard polishing agent, but will return.
Key features
- Classic quarter-round visible face
- Extruded aluminium, AA 6063 T6 alloy
- 30 mm perforated flange for embedding in the tile adhesive
- Matching Genesis corner piece in the same colour and thickness
Technical specifications
| Item number |
EAQ127.01 |
| Brand and series |
Genesis EAQ |
| Profile shape |
Quarter-round profile |
| Material |
Aluminium AA 6063 T6 / UNS A96063 |
| Colour |
White |
| Finish |
Powder-coated |
| Suitable for tile thickness |
12 mm |
| Length |
2.7 m |
| Wall thickness |
1 mm |
| Mounting flange width |
30 mm |
| Matching outside corner piece |
EAC120.01 |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. This version is for 12 mm tiles; the profile must not protrude above the tile surface.
How do I prevent damage from adhesive or grout? Wipe adhesive and grout residues off the profile immediately before they harden. Cement-based residues become alkaline when combined with moisture and can damage the aluminium and finish.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it into place, apply another layer of adhesive over the flange to ensure no cavities are left behind.
How do I finish a corner? Use the EAC120.01 outside corner piece to finish the corner without cutting a miter. Without a corner piece, cut the profile at a 45-degree miter.