This straight tile profile from Genesis' ESP series is the straight alternative to the round ETR profile. It can be used with rectified and straight-cut tiles as well as standard ceramic tiles, and can also serve as a cover strip for partially tiled surfaces or with a ceramic skirting board. This version is designed for a tile thickness of 10 mm, has a length of 2.5 metres and is available in jasmine (Genesis Soft Cream).
Product & function
The profile is made of UPVC, a plastic with good chemical resistance. The visible edge is 3 mm wide and the perforated fixing flange 21 mm.
Application & compatibility
The profile is designed for wall and floor tiles, as a cover strip and with skirting boards. Choose the version that matches the thickness of your tile, so that the top of the profile is flush with the tile surface. Genesis does not supply corner pieces for this series: cut the corner at a 45-degree miter. Use a miter box to keep the cut precise.
Use & key points
- Determine the exact position of the profile relative to the tiles to be laid.
- Coat the profile with standard tile adhesive and ensure that the adhesive penetrates the holes in the flange. For extra grip, there are 5 mm holes for mechanical fixing.
- Distribute the adhesive over the flange and press the tiles firmly against the profile.
- A joint is not necessary. If a joint is still visible, press the joint filler firmly into it.
Not suitable for use above 60 °C. Resistant to most oils, alcohols, petrol and fats. Not resistant to aromatic and chlorinated hydrocarbons, ketones, nitro compounds, esters and cyclic ethers: these cause swelling. Special maintenance is not required; clean the profile periodically with a neutral detergent to maintain its appearance.
Key features
- Straight profile with a 3 mm visible edge
- UPVC with good chemical resistance
- Also suitable as a cover strip or with a skirting board
- Mitered corners
Technical specifications
| Item number |
ESP100.32 |
| Brand and series |
Genesis ESP |
| Profile shape |
Straight L-profile |
| Material |
UPVC (plastic) |
| Colour |
Jasmine (Genesis Soft Cream) |
| Suitable tile thickness |
10 mm |
| Length |
2.5 m |
| Visible edge |
3 mm |
| Wall thickness |
0.8 mm |
| Fixing flange width |
21 mm |
| Maximum operating temperature |
60 °C |
| Vicat softening point |
79.8 ± 20 °C (ISO 306) |
| Shore hardness |
70 ± 5 ShD (PN-EN ISO 868:2005) |
| Charpy impact strength |
1.7 kJ/m² (PN-EN ISO 179-1/1eC:2010, tested on raw material) |
| Maximum stress |
35.4 MPa (PN-EN ISO 527-1/-2:2012) |
| Colour deviation from reference |
ΔE ≤ 4 |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. This version is for 10 mm tiles; the profile must not protrude above the tile surface.
What is this PVC profile not resistant to? Temperatures above 60 °C and, among others, aromatic and chlorinated hydrocarbons, ketones, esters and nitro compounds. It is resistant to most oils, alcohols, petrol and fats.
Should I leave a joint between the tile and the profile? No, that is not necessary. If you do see a joint, press the joint filler firmly into it.
How do I finish a corner? Genesis does not supply corner pieces for this series. Cut the profile at a 45-degree miter, preferably using a miter box.
