This straight tile profile from Genesis' ESA series protects the edges of ceramic tiles and other hard finishes in wall and floor applications. It is an L-shaped aluminium profile that covers and protects the tile edge. This version is designed for 8 mm thick tiles, has a length of 2.7 metres and is supplied in natural aluminium.
Product & function
The profile is extruded from AA 6063 T6 aluminium. This natural version is untreated aluminium with only a natural oxide layer of approximately 0.2 microns; the profile is neither anodised nor powder-coated. For outdoor applications, Genesis recommends a powder-coated finish.
Application & compatibility
The profile is designed for wall and floor tiles. Choose the version that matches the thickness of your tile, so that the top of the profile is flush with the tile surface. We do not supply corner pieces for this series. Cut the corner at a 45-degree miter; using a miter box will help you maintain a precise angle.
Use & key points
- Choose the profile that matches the thickness of the tile.
- Apply tile adhesive over the area forming the edge of the tiling.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly. The tile surface should be flush with the top of the profile: the profile should not sit higher than the tile, but approximately 1 mm lower.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues immediately from visible surfaces and ensure that the profile is fully embedded, without cavities in which alkaline water can collect. The surface is sensitive to scratches and wear and can be damaged by tile adhesive, mortar or grout. Before exposing aluminium to chemical or mechanical stress, check whether it is suitable for the application. Special maintenance is not required. An oxide film can be removed with a standard polishing agent, but it will return.
Key features
- Straight L-profile with a 3 mm visible edge
- Extruded aluminium, AA 6063 T6 alloy
- 21 mm perforated flange for embedding in the tile adhesive
- Mitered corners; no corner pieces for this series
Technical specifications
| Item number |
ESA087.80 |
| Brand and series |
Genesis ESA |
| Profile shape |
Straight L-profile |
| Material |
Aluminium AA 6063 T6 / UNS A96063 |
| Colour |
Natural aluminium |
| Suitable for tile thickness |
8 mm |
| Length |
2.7 m |
| Mounting flange width |
21 mm |
| Material thickness |
0.8 mm |
| Visible edge |
3 mm |
| Treatment |
Untreated, natural oxide layer of approximately 0.2 microns |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. This version is for 8 mm tiles; the profile must not protrude above the tile surface.
How can I prevent damage from adhesive or grout? Wipe adhesive and grout residues off the profile immediately before they harden. Cement-based residues become alkaline when exposed to moisture and can damage the aluminium and finish.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it into place, apply another layer of adhesive over the flange to ensure no cavities are left behind.
Can I cut this profile to size? Yes. Cut the profile with a fine-toothed saw and neatly finish the cut edge.
