This straight tile profile from Genesis' ESS series is made of stainless steel and protects the edge of a floor or wall finish. Genesis recommends this series for protecting stair treads and edges in areas such as the food industry, breweries, dairy plants, hospitals, and outdoor applications. This version is designed for 12 mm thick tiles, has a length of 2.7 metres, and is made of polished stainless steel.
Product & function
The profile is made of AISI 304 grade stainless steel (DIN 1.4301). According to Genesis, it has excellent resistance to the main chemical and atmospheric influences, and its smooth, non-porous surface is easy to clean. The polished version comes standard with a removable protective film that protects the surface before, during, and after installation.
Application & compatibility
The profile is designed for wall and floor tiles and stair treads. Choose the version that matches your tile thickness so that the top of the profile is flush with the tile surface. Genesis does not supply corner pieces for this series: cut the corner at a 45-degree miter. Use a miter box to keep the cut precise.
Use & key points
- Wear gloves: exposed edges can be sharp.
- Choose the profile that matches your tile thickness.
- Apply tile adhesive over the area forming the edge of the tiling.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange so that it is fully embedded.
- Set the tiles firmly. The tile surface should be flush with the top of the profile: the profile should not sit higher than the tile, but approximately 1 mm lower.
- Fill the joint completely.
Stainless steel is corrosion-resistant, but is not rustproof in all conditions. Chlorine and bromine, particularly in swimming pools, can damage it. Clean the profile regularly with water and a mild detergent and dry it afterwards. Do not use steel wool, sandpaper, mineral acids, bleach, or chlorine-based cleaners. Discolouration and water marks can be removed with a standard metal polish; always work in the direction of the grain when touching up.
Key features
- AISI 304 stainless steel
- Resistant to the main chemical and atmospheric influences
- Smooth, non-porous surface with a 2 mm visible edge
- Mitered corners
Technical specifications
| Item number |
ESS127.84 |
| Brand and series |
Genesis ESS |
| Profile shape |
Straight L-profile |
| Material |
AISI 304 stainless steel (DIN 1.4301) |
| Colour |
Polished stainless steel |
| Suitable for tile thickness |
12 mm |
| Length |
2.7 m |
| Visible edge |
2 mm |
| Material thickness |
0.8 mm |
| Mounting flange width |
20 mm |
| Delivery |
With removable protective film |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. This version is for 12 mm tiles; the profile must not protrude above the tile surface.
Is stainless steel completely rustproof? No. Stainless steel is corrosion-resistant, but in an aggressive environment such as a chlorinated swimming pool, it can discolour or rust. Rinse the profile regularly with clean water and dry it afterwards.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it in, apply another layer of adhesive over the flange to ensure no voids are left behind.
How do I finish a corner? Genesis does not supply corner pieces for this series. Cut the profile at a 45-degree miter, preferably using a miter box.
