This square tile profile from Genesis' TDP series is an alternative to a standard straight or L-shaped profile and gives the tile edge a more luxurious, square finish. It can be used as an edge trim on walls or floors, or as a decorative strip within the tiled area. This version is designed for 10 mm tiles, has a length of 2.7 metres and is finished in dark granite.
Product & function
The profile is extruded from AA 6063 T6 aluminium and this version is powder-coated. For outdoor applications, Genesis recommends a powder-coated finish such as this.
Application & compatibility
The profile is designed for wall and floor tiles and as a decorative strip. Choose the version that matches the thickness of your tiles so that the top of the profile is flush with the tile surface. Genesis makes EDP corner pieces for internal and external corners in 8, 10 and 12 mm for this series. We do not stock them in this combination of colour and thickness; otherwise, cut the corner at a 45-degree miter or ask us for advice.
Use & key points
- Choose the profile that matches the thickness of the tiles.
- Apply tile adhesive over the area forming the edge of the tiling.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly so that the tile surface is flush with the top of the profile. The profile must not sit higher than the tile.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues immediately from visible surfaces and ensure that the profile is fully embedded, without cavities in which alkaline water can collect. The surface is sensitive to scratches and wear and can be damaged by tile adhesive, mortar or grout. Before exposing aluminium to chemical or mechanical stress, check whether it is suitable for the situation. Special maintenance is not required. An oxide film can be removed with a standard polishing agent, but it will return.
Key features
- Square visible surface of 10 mm
- Suitable for use as an edge trim and as a decorative strip
- Extruded aluminium, AA 6063 T6 alloy
- Corners can be finished with a miter or with a Genesis EDP corner piece
Technical specifications
| Item number |
TDP107.435 |
| Brand and series |
Genesis TDP |
| Profile shape |
Square profile |
| Material |
Aluminium AA 6063 T6 / UNS A96063 |
| Colour |
Dark granite |
| Treatment |
Powder-coated |
| Suitable for tile thickness |
10 mm |
| Length |
2.7 m |
| Visible surface |
10 mm |
| Wall thickness |
1 mm |
| Mounting flange width |
27 mm |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tiles. This version is for 10 mm tiles; the profile must not protrude above the tile surface.
How can I prevent damage from adhesive or grout? Wipe adhesive and grout residues off the profile immediately before they harden. Cement-based residues become alkaline when combined with moisture and can damage the aluminium and its finish.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it into place, apply another layer of adhesive over the flange to ensure no cavities are left behind.
How do I finish a corner? Cut the profile at a 45-degree miter. Genesis also makes EDP corner pieces for internal and external corners for this series; feel free to ask us for advice.
