This square tile profile from Genesis' TDP series is an alternative to a standard straight or L-shaped profile and gives the tile edge a more luxurious, square finish. It can be used as an edge trim on walls or floors, or as a decorative strip within the tiled area. This version is designed for 12 mm thick tiles, has a length of 2.7 metres and is finished in matte black.
Product & function
The profile is extruded from AA 6063 T6 aluminium and this version is anodised in accordance with DIN 17611. For outdoor use, Genesis recommends a powder-coated finish.
Application & compatibility
The profile is designed for wall and floor tiles and as a decorative strip. Choose the version that matches your tile thickness so that the top of the profile is flush with the tile surface. The matching Genesis corner piece is EDP122.17 in matte black, 12 mm, for internal and external corners. This allows you to finish the corner without mitring and without sharp edges.
Use & key considerations
- Choose the profile that matches your tile thickness.
- Apply tile adhesive over the area forming the edge of the tiled surface.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply an additional layer of adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly so that the tile surface is flush with the top of the profile. The profile must not sit higher than the tile.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues immediately from visible surfaces and ensure that the profile is fully embedded, without cavities in which alkaline water can collect. The surface is sensitive to scratches and wear and can be damaged by tile adhesive, mortar or grout. Before using it for chemical or mechanical loading, check whether aluminium is suitable for the application. No special maintenance is required. An oxide film can be removed with a standard polishing agent, but will reappear. A damaged anodised finish can only be repaired by recoating.
Key features
- Square visible surface of 10 mm
- Suitable for use as an edge trim and as a decorative strip
- Extruded aluminium, AA 6063 T6 alloy
- Matching EDP corner piece for internal and external corners
Technical specifications
| Item number |
TDP127.17 |
| Brand and series |
Genesis TDP |
| Profile shape |
Square profile |
| Material |
Aluminium AA 6063 T6 / UNS A96063 |
| Colour |
Matte black |
| Treatment |
Anodised (DIN 17611) |
| Suitable tile thickness |
12 mm |
| Length |
2.7 m |
| Visible surface |
10 mm |
| Wall thickness |
1 mm |
| Mounting flange width |
27 mm |
| Matching corner piece |
EDP122.17 |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. This version is for 12 mm tiles; the profile must not protrude above the tile surface.
How can I prevent damage from adhesive or grout? Wipe adhesive and grout residues off the profile immediately before they harden. Cement-based residues become alkaline when combined with moisture and can damage the aluminium and its finish.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it into place, apply another layer of adhesive over the flange to ensure no cavities are left behind.
How do I finish a corner? With the Genesis EDP122.17 corner piece, you can finish internal and external corners without mitring. Without a corner piece, the profile must be cut at a 45-degree miter.
