This square tile profile from Genesis provides a clean square finish and protects the edge of the tilework. This version is intended for a tile thickness of 10 mm and has a length of 2.5 metres. The version is black.
Product & function
The profile is made of grade 304 stainless steel. The manufacturer also recommends stainless steel for outdoor applications.
Application & compatibility
The profile is intended for wall and floor tiles. Choose the version according to the thickness of your tile, so that the top of the profile is flush with the tile surface. We do not supply a corner piece for this series. Cut the corner at a 45-degree miter; using a miter box will help you keep the angle controlled.
Use & points to consider
- Choose the profile according to the thickness of the tile.
- Apply tile adhesive over the area forming the edge of the tilework.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly. The tile surface should be flush with the top of the profile: the profile should not be higher than the tile, but approximately 1 mm lower.
- Fill the joint completely.
Exposed edges can cause injury. Wear gloves when handling. Discolouration or water marks can be removed with a standard metal polish. For light rust formation, a stronger product is required. When touching up the surface, always work in the direction of the grain and never use steel wool.
Key features
- Grade 304 stainless steel
- Resistant to the main chemical and atmospheric influences
- Smooth, non-porous surface
- Mitered corners; no corner piece for this series
Technical specifications
| Steel grade |
AISI 304 |
| Surface |
Smooth and non-porous |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. Measure the tile and choose the version that matches; the profile must not protrude above the tile surface.
Why stainless steel instead of aluminium? Stainless steel is harder and has better resistance to chemical and atmospheric influences. The manufacturer recommends it for harsher environments such as the food industry, dairy companies and hospitals.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it in, apply another layer of adhesive over the flange so that no voids are left.
Can I cut this profile to size? Yes. Cut the profile with a fine-toothed saw and neatly touch up the cut edge.