This square tile profile from Genesis' TDP series is an alternative to a standard straight or L-shaped profile and gives the tile edge a more luxurious, square finish. It can be used as an edge trim on walls or floors, or as a decorative strip within the tiled area. This version is designed for 12 mm tiles, has a length of 2.7 metres, and is available in sand (Sand Stone).
Product & function
The profile is extruded from AA 6063 T6 aluminium, and this version is powder-coated. For outdoor applications, Genesis recommends a powder-coated finish such as this.
Application & compatibility
The profile is designed for wall and floor tiles, as well as for use as a decorative strip. Choose the version that matches the thickness of your tiles, so that the top of the profile is flush with the tile surface. Genesis produces EDP corner pieces for internal and external corners in 8, 10 and 12 mm for this series. We do not offer them in this combination of colour and thickness; alternatively, cut the corners at a 45-degree miter or ask us for advice.
Use & key considerations
- Choose the profile that matches the thickness of your tiles.
- Apply tile adhesive over the area forming the edge of the tiled surface.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply an additional layer of adhesive over the flange to ensure it is fully embedded.
- Bed the tiles firmly so that the tile surface is flush with the top of the profile. The profile must not sit higher than the tiles.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues immediately from visible surfaces and ensure that the profile is fully embedded, without cavities in which alkaline water can collect. The surface is sensitive to scratches and wear and can be damaged by tile adhesive, mortar or grout. Before exposing aluminium to chemical or mechanical stress, check whether it is suitable for the application. No special maintenance is required. An oxidised film can be removed with a standard polishing agent, but will reappear.
Key features
- 10 mm square visible surface
- Suitable for use as an edge trim and decorative strip
- Extruded aluminium, AA 6063 T6 alloy
- Corners can be finished with a miter or with a Genesis EDP corner piece
Technical specifications
| Item number |
TDP127.425 |
| Brand and series |
Genesis TDP |
| Profile shape |
Square profile |
| Material |
Aluminium AA 6063 T6 / UNS A96063 |
| Colour |
Sand (Sand Stone) |
| Finish |
Powder-coated |
| Suitable tile thickness |
12 mm |
| Length |
2.7 m |
| Visible surface |
10 mm |
| Wall thickness |
1 mm |
| Mounting flange width |
27 mm |
Frequently asked questions
Which profile thickness do I need? The profile thickness corresponds to the thickness of your tiles. This version is for 12 mm tiles; the profile must not protrude above the tile surface.
How can I prevent damage from adhesive or grout? Wipe off adhesive and grout residues immediately while they are still wet. Cement-based residues become alkaline when combined with moisture and can damage the aluminium and finish.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it into place, apply another layer of adhesive over the flange to ensure no cavities are left behind.
How do I finish a corner? Cut the profile at a 45-degree miter. Genesis also produces EDP corner pieces for internal and external corners in this series; feel free to ask us for advice.