This self-adhesive cover profile from Genesis covers a joint between two floor finishes that are at the same height and is installed afterwards. Thanks to the self-adhesive strip, mechanical fastening is not required. It is an affordable solution for hard and smooth flooring. This version is 3.5 mm high. The finish is matte silver.
Product & function
The profile is extruded from AA 6063 T6 aluminium and anodized according to DIN 17611. For outdoor use, the manufacturer recommends a powder-coated finish.
Application & compatibility
The profile is intended for joints between floor finishes at the same level and is placed on an existing floor or step. Choose the version with the width and height that fit the transition. We do not supply a corner piece for this series. Cut the corner at a 45-degree miter; using a miter box will help you keep the cut controlled.
Use & points to consider
- Thoroughly clean the substrate. Dirt and grease prevent the adhesive strip from bonding.
- The adhesive strip only bonds to a smooth, hard, and dry substrate.
- Determine the position, remove the protective film, and press the profile firmly into place along its entire length.
Aluminium is sensitive to alkalis. Cement-bound materials become alkaline when combined with moisture, so remove adhesive and grout residues from visible surfaces and ensure the profile is fully embedded. In the event of chemical or mechanical stress, first check whether aluminium is suitable for the situation. No special maintenance is required. An oxide film can be removed with a standard polishing agent, but it will return. Damaged anodizing can only be repaired by recoating.
Key features
- Self-adhesive, no mechanical fastening required
- Extruded aluminium, AA 6063 T6 alloy
- Anodized according to DIN 17611
- No special maintenance required
- Miter the corners; no corner piece for this series
Technical specifications
| Application |
Cover profile for floor transitions |
| Alloy |
Aluminium AA 6063 T6 / UNS A96063 |
| Anodizing standard |
DIN 17611 |
| Natural oxide layer |
approx. 0.2 microns |
| Polished and anodized oxide layer |
5 microns |
| Matte finish oxide layer |
up to 20 microns |
| Powder-coated oxide layer |
100 microns |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. Measure the tile and choose the version that fits; the profile must not protrude above the tile surface.
Can this profile withstand moisture? Aluminium is resistant to normal moisture exposure in bathrooms and kitchens. However, be aware of fresh cement and grout residues: they become alkaline when exposed to moisture and can damage the surface. Wipe them away before they have hardened.
What does the adhesive strip bond to? The strip only bonds to a smooth, hard, and dry substrate. First, thoroughly clean the surface; dirt and grease prevent adhesion.
Can I cut this profile to size? Yes. Cut the profile with a fine-toothed saw and neatly finish the cut edge.