This Genesis EAQ series quarter round tile profile features a classic quarter round visible face and protects the edge of ceramic tiles or a similar hard surface in wall and floor applications. This version is designed for 6 mm tiles, has a length of 2.7 metres and is supplied in white.
Product & function
The profile is extruded from AA 6063 T6 aluminium and this version is powder coated. For outdoor applications, Genesis recommends a powder coated finish such as this.
Application & compatibility
The profile is designed for wall and floor tiles. Choose the version that matches the thickness of your tiles so that the top of the profile is flush with the tile surface. Genesis does not make corner pieces for the 6 mm version; cut the corner at a 45-degree miter. A miter box will help you cut the corner in a controlled manner.
Use & key points
- Choose the profile that matches the thickness of your tiles.
- Apply tile adhesive over the area forming the edge of the tiled surface.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly. The tile surface should be flush with the top of the profile: the profile should not be higher than the tile, but approximately 1 mm lower.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues immediately from visible surfaces and ensure that the profile is fully embedded, without cavities in which alkaline water can remain. The surface is sensitive to scratches and wear and can be damaged by tile adhesive, mortar or grout. In the event of chemical or mechanical loading, first check whether aluminium is suitable for the situation. Special maintenance is not required. An oxidative film can be removed with a standard polishing agent, but will return.
Key features
- Classic quarter round visible face
- Extruded aluminium, AA 6063 T6 alloy
- 30 mm perforated flange for embedding in the tile adhesive
- Mitered corners
Technical specifications
| Item number |
EAQ067.01 |
| Brand and series |
Genesis EAQ |
| Profile shape |
Quarter round profile |
| Material |
Aluminium AA 6063 T6 / UNS A96063 |
| Colour |
White |
| Finish |
Powder coated |
| Suitable tile thickness |
6 mm |
| Length |
2.7 m |
| Wall thickness |
1 mm |
| Mounting flange width |
30 mm |
Frequently asked questions
What profile thickness do I need? The thickness of the profile matches the thickness of your tiles. This version is for 6 mm tiles; the profile must not protrude above the tile surface.
How do I prevent damage from adhesive or grout? Wipe adhesive and grout residues off the profile immediately before they have hardened. Cement-based residues become alkaline when combined with moisture and can damage the aluminium and the finish.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it in, apply another layer of adhesive over the flange so that no cavities are left behind.
How do I finish a corner? Genesis does not make corner pieces for 6 mm. Cut the profile at a 45-degree miter, preferably using a miter box.